A drop-in stock installation, stock looking replacement that is anything but stock! The larger Ballistic Billet compressor wheel and our new exclusive Low MOI QST turbine wheel results in reduced backpressure, quicker response, increased efficiency and increased turbine flow compared to the competition. This results in increased maximum potential power output, right up to 690 horsepower with supporting modifications. No extra parts to install, just drop-in and enjoy the extra power potential. Perfectly paired with a pulse Manifold made from high-silicon ductile iron and designed to withstand extreme temperatures and vibration. Precision slip joints allow the Manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases Manifold longevity.
Note
For pick-up models only. Cab & Chassis cores returned for credit will not be accepted. Not for sale on licensed California vehicles Speed sensor is not included. Swap over your speed sensor from your original Turbocharger before reinstall. Warning: Some tuning programs may restrict vane opening position which can cause high drive pressures and may lead to Turbocharger over speed failure (non-warrantable). Use caution with custom tuning that alters turbo vane position to increase wheel speed.
BD Diesel - 1045871 - Features
Turbocharger
Manifold
50-State Legal!
Pre-drilled for pyrometer probes
CARB EO No D-553-5
Gasket, Bolt and Spacers kits are available separately
Drops in to the stock location
6.7L performance stock replacement Manifold for use with the Holset HE351 Turbo
Can support modifications up to 690HP
Cast of high silicon ductile iron to withstand extreme temperature cycling caused during DPF regeneration
Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel
Larger porting design than others will handle any increase in power
The QST Turbine wheel has a 15% reduction in MOI (moment of inertia) which results in quicker turbo response
Thick walled casting and integral slip joint prevents cracking and exhaust leaks
QST Turbine blade thickness decreased by 25% allowing for higher turbine gas flow and increased efficiency
Experience quick spool times and low drive pressures with an overall increase in performance
Each actuator is calibrated and tested prior to shipping
Fully EGR compatible
VSR high speed balanced
Open throat outlet flange outperforms the stock Manifold
BD Diesel - 1045871 - Vehicle Fitment
YEAR
MAKE - ENGINE SERIES
2007-2010
Dodge - 6.7 Ram 2500
2007-2010
Dodge - 6.7 Ram 3500
2011-2012
Dodge (Ram) - 6.7 2500
2011-2012
Dodge (Ram) - 6.7 3500
BD Diesel - 1045871 - Specifications
Manufacturer's Part Number
1045871
Manufacturer Name
BD Diesel Performance
Weight (Lbs)
83
Length
46
Width
16
Height
15
UPC
990011409742
Country of Origin
CA
HTC
8414800500
Hazmat
N
Prop 65 Cancer
Y
Prop 65 Reproductive
Y
Prop 65 Labeling
WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov
Install Time
9 Hours
Parts Warranty
12-Months
Emissions
This product has met EPA's reasonable basis requirements and is legal for sale and use within the jurisdiction of the federal EPA. (EMS:2)
Diesel Exhaust Manifolds: An Inside Look At How They'Re Made
Diesel Exhaust Manifolds: An Inside Look At How They'Re Made
Crafted with precision, our BD Diesel Exhaust Manifolds boast a robust, thicker design, and are constructed from high-silicon ductile iron to combat warping, ensuring your vehicle remains at peak performance for the long haul.
What To Look For In A Diesel Turbo Upgrade | How Bd Makes Your Diesel "Scream"
What To Look For In A Diesel Turbo Upgrade | How Bd Makes Your Diesel "Scream"
