Filter cross-reference guide for the FASS 200G fuel system. Use the chart below to match the correct fuel filter and water separator by micron rating across Baldwin, Carquest, CAT, Donaldson and Fleetguard equivalents when servicing your fuel system.
Download the Original PDF Manual
Filters Currently In Use
The FASS Titanium Series 200G fuel system ships with the following filters installed. When servicing, replace with these part numbers or an equivalent from the cross-reference tables below.
- Fuel filter: FASS FWS-3003
- Water separator: FASS FS-1001
NOTE: All filters listed use a 1–14 thread size. Always confirm the micron rating and thread size match your application before installing a cross-referenced filter.
Fuel Filter Cross-Reference
Equivalent fuel filters by manufacturer, with micron rating shown in parentheses.
- Baldwin BF7633 (2M)
- Carquest 86528 (2M)
- CAT 1P2299 (6M)
- Donaldson P550625 (3M)
- Donaldson P551025 (4M)
- Donaldson P551311 (3M)
- Donaldson P551313 (3M)
- Donaldson P553203 (3M)
- Donaldson P557440 (6M)
- Fleetguard FF5320 (2M)
- Fram P8334 (2M)
- Hastings FF1079 (2M)
- Wix 33352 (6M)
- Wix 33528 (2M)
- Wix 33674 (2M)
Water Separator Cross-Reference
Equivalent water separator filters by manufacturer, with micron rating shown in parentheses where listed.
- Baldwin BF1258 (10M)
- Baldwin BF1214
- Baldwin BF7546 (10M)
- Donaldson P558000 (20M)
- Donaldson P551000 (10M)
- Donaldson P551001 (10M)
- Fleetguard FS1282 (14M)
- Fleetguard FS-1000 (10M)
- Fleetguard FS-1001 (10M)
- Fleetguard FS-1009 (14M)
- Fleetguard FS-1212 (14M)
- LuberFiner LFF8011
- LuberFiner LFF8000
- Motorcraft FD818 (14M)
- Wix 33405 (14M)
- Wix 33522 (10M)